Best Way to Mount Camera on House Soffit

How to Mount Security Camera to Soffit: 5 Simple Steps

Introduction

Are you worried about poking a gigantic hole in your soffit while installing a security camera? Well, it can be a fleck intimidating but with proper guidance, it'll seem like a slice of cake.

Then, how to mount security camera to soffit without causing permanent damage to the firm?

To mount the security camera, yous have to drill a hole into the soffit and adhere the cable through information technology. Start by removing a segment of soffit and so drill into information technology. Later on, fasten the mounting box using toggle bolts. Lastly, connect the camera to the fastened mountain box.

Notwithstanding, confused about what we're trying to say? Well, and then stay with the states a trivial longer. That's because we're about to dive into a puddle of details to explicate it to you fully.

Shall we kickoff so?

How to mount security camera to soffit all past yourself?

Yous know, installing a security photographic camera to the soffit isn't a complicated procedure. No, in fact, it's quite piece of cake and can be dealt with in 6 easy steps.

Moreover, it'll only take you lot 15 minutes to become the work done. However, you lot do need to gather upwardly some tools outset. So, what say nosotros have a look at the items we'll be needing?

Take hold of these essentials

Now, for a technical chore like installing a photographic camera you lot practice demand some equipment. Hence, to make things easier for you we made a complete list of all the items y'all'll need.

LIST OF ITEMS-

• Pry Tools
• Drilling machine
• Toggle Bolts
• Hammer
• Crimping Tool
• Mounting Box

Exercise you lot take all these items with you? Well, fantastic then! Nosotros tin can finally kickoff now.

Stride 1- Remove a section of soffit using a pry tool

Start of all, identify the place where you desire to install the security photographic camera. Nosotros recommend you to find a corner that kind of hides the camera but at the same time covers most of the infinite which you want to observe.

And then take out the pry tool and carefully remove the soffit. While doing this brand certain you try to slide the soffit towards your firm. This volition lift off the soffit quite easily.

One caution: Check the space above the soffit to ensure there is no obstacle in its style.

Step 2- Drill into the soffit

Secondly, take out your drill machine. This is considering it's time to drill a hole into the soffit to brand some space for the cables and the screws.

For the screws, you demand to make 3 holes. Yet, brand sure that the drill size matches the screw's size. Next up, make a bigger hole for the cable to pass through.

Stride three- Fasten mounting box with toggle bolts

After the drilling task ends you need to fasten the mounting box. Why should you fasten the mounting box? Well, this astonishing device allows y'all to mount the photographic camera easily.

Moreover, you won't take to drill a huge hole in your soffit due to the mounting box. And then, it's a win-win. Hence, apply ii toggle bolts to attach the mounting box to the soffit.

Later, hammer the toggle bolts to fit it into its place.

Stride 4- Brand the wires waterproof

1 affair you should be careful most is water. You don't want the rain to drench your cable and cease the camera from functioning properly now, practise you?

This is why you need to make the cables waterproof. And for this detail chore you lot need waterproof connectors. Install them around the cable and you're done.

Step v- Crimp the cables

Before the last step, you demand to crimp the wires. For this, you need a crimping tool.

So, to showtime, you demand to arrange the wires- side by side. Then put it under the crimping tool and cutting the edges of the wire. Subsequently this, yous'll find that the wires are a bit exposed.

Hence, exist careful, if they are continued to an electrical supply yous might get electrocuted.

Footstep 6- Connect the camera with the mounting box

Lastly, attach all the cables to the wire. And install the photographic camera on the mounting box. For this, y'all need to screw the camera into the mounting box.

At the same time, don't forget to fasten the safety harness. It will ensure that the camera stays in its place and doesn't fall down.

FAQ

Question: What screws to use for soffit?

Answer: The soffit has its own kind of screws that they prefer. These are called soffit screws. And their recommended size is ⅝ inches. However, one caution: Do not let the screws get wet.

Question: Tin you lot hand things from soffit?

Respond: You can hang some items from the soffit to decorate your firm a flake. For this, y'all tin apply the hooks that are specially crafted to hang items from the soffit. Yet, brand sure you don't hang besides heavy items.

Question: How exercise you run photographic camera wires in the attic?

Answer: Firstly, run the wires through the attic to the camera. This should pass through the pigsty in the attic. Then fasten it by using an electrical tape. Lastly, drill the camera to secure information technology in its place.

Question: How much does it toll to repair soffit?

Respond: Now, if y'all made a pigsty while installing a photographic camera you can always take your soffit repaired. This volition cost y'all effectually 20 to 30 dollars. Notwithstanding, to repair fascia information technology will accept 15 to 25 dollars.

To wrap up

Sounds easy, doesn't it? Well, nosotros believe that you tin can do it too. So, why don't you become upwardly and give it a try?

In case things don't piece of work out we're here to assistance yous with how to mount security camera to soffit . Simply, leave a comment and we'll become back to y'all.

That'southward all for at present. Take intendance. Adios!

johnsongingee.blogspot.com

Source: https://norcoalarms.com/how-to-mount-security-camera-to-soffit/

Share this post